In some cases, you may even experience new bugs with a new version of the BIOS, as the BIOS that came with your computer may have gone through more testing.Flashing a BIOS isn’t as easy as installing a normal software update.Computers should ideally have a backup BIOS stored in read-only memory, but not all computers do.Given that you probably will not see any improvements from updating your BIOS, that new bugs could pop up, and the potential for errors while flashing, you shouldn’t update your BIOS unless you have a reason to.The A03 (1.) release addresses potential BSOD issue when using NETOP remote access software Dell Latitude E6400 Broadcom Unified Security Hub Firmware A04 New It is strongly recommended to have the latest driver version available.The following files are Dell Notebook Bootable CD Images.You will often want to flash your computer from DOS (yes, DOS – you may have to create a bootable USB drive with DOS on it and restart into that environment), as problems could occur when flashing from Windows.Each manufacturer has their own instructions for flashing a BIOS.
If you built your own computer, a BIOS update would come from your motherboard vendor.
You should only update your BIOS if the new version contains an improvement you need. When you power your computer on, your BIOS takes control, starting the power-on self test (POST) and passing control over to the boot loader, which boots your computer’s operating system.
The BIOS is low-level system software that should “just work” without getting in your way.
Double-click the new icon on the desktop labeled CREATIVE-LABS_E2-INTEGRATED-_A01_R269917.
Dell Latitude E6410 ATG Creative Labs E2 Integrated Webcam.
Note 1: You will need to provide a bootable DOS USB key.